ContiTech AG131.2 MXL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 131.2 MXL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.08 |
| Tooth step | t | мм | 2.032 |
| Thickness | hs | мм | 1.14 |
| Tooth height | ht | мм | 0.51 |
| Nominal length | Lp/Lw | дюйм (1/10) | 131.2 |
| Nominal length | Lp/Lw | мм | 333.25 |
| Number of teeth |
164 | ||
| Minimum pulley diameter | dw | мм | 6.47 |
| Max line speed | Vmax | м/c | 50 |
Подшипник NJ 2236 E
Manufacturer: NACHI
Sizes: 180x320x86 (mm)
Weight:: 34.5 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 100x130x13 (mm)
D 264 32x6704 Li / 6780 Ld
Manufacturer: ContiTech AG
Подшипник 53406
Manufacturer: NSK-RHP
Sizes: 30x70x30.1 (mm)
Weight:: 0.73 (kg)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 62302-2RSR
Manufacturer: FAG
Sizes: 15x42x17 (mm)
Bearing K26x30x10
Manufacturer: INA-FAG
Sizes: 26x30x10 (mm)
Weight:: 0.0007 (kg)
Bearing AS120155
Manufacturer: INA-FAG
Sizes: 120x155x1 (mm)
Weight:: 0.059 (kg)
RPP14 5586 ( RPP 14 5586 -V, -M, -MFX )
Manufacturer: ContiTech AG
Подшипник 7315C
Manufacturer: NACHI
Sizes: 75x160x37 (mm)
Weight:: 3.15 (kg)
T5 DD
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
