ContiTech AG296XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 296XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 296 |
| Nominal length | Lp/Lw | мм | 751.84 |
| Number of teeth |
148 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 16x37x7 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 200x250x15 (mm)
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 130x170x13 (mm)
Подшипник 2201
Manufacturer: NSK-RHP
Sizes: 12x32x14 (mm)
Подшипник 5204
Manufacturer: NACHI
Sizes: 20x47x20.6 (mm)
Weight:: 0.12 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 35x52x7 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 74.50x78.50x2.00 (mm)
Подшипник NJ 2330 E
Manufacturer: NACHI
Sizes: 150x320x108 (mm)
Weight:: 48.2 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 120x140x14 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
