ContiTech AG260XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 260XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 260 |
| Nominal length | Lp/Lw | мм | 660.4 |
| Number of teeth |
130 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
Подшипник 6948
Manufacturer: NSK-RHP
Sizes: 240x320x38 (mm)
Weight:: 8.49 (kg)
SEALS (REINFORCED SEAL) (B)
Manufacturer: FEKO
Sizes: 73.02x104.91x20.63 (mm)
AX 53 AX 1376 Ld
Manufacturer: ContiTech AG
Подшипник 53215
Manufacturer: NACHI
Sizes: 75x110x28.3 (mm)
Weight:: 225 (kg)
Подшипник E33121J
Manufacturer: NACHI
Sizes: 105x175x56 (mm)
Weight:: 5.43 (kg)
K21 PU(28x48x12)
Manufacturer: KASTAS
Sizes: 28x48x12 (mm)
Bearing 1218 K
Manufacturer: ETERNO
Sizes: 90x160x30 (mm)
Weight:: 2.59 (kg)
K17 PTFE/NBR(145x124x8,1 )
Manufacturer: KASTAS
Sizes: 145x124x8,1 (mm)
K31 PU/NBR/POM(90x100x12 )
Manufacturer: KASTAS
Sizes: 90x100x12 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 290x330x18 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
