ContiTech AG240XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 240XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 240 |
| Nominal length | Lp/Lw | мм | 609.6 |
| Number of teeth |
120 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
K59F PU(80x70x4,25)
Manufacturer: KASTAS
Sizes: 80x70x4,25 (mm)
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 50x90x13 (mm)
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 25x40x8 (mm)
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 62x82x10 (mm)
Bearing 31322
Manufacturer: ETERNO
Sizes: 110x240x57 (mm)
Weight:: 12 (kg)
K780 PTFE(115x120x45)
Manufacturer: KASTAS
Sizes: 115x120x45 (mm)
K11 TPE(115x127,2x12/7,2)
Manufacturer: KASTAS
Sizes: 115x127,2x12/7,2 (mm)
XPA 2482 Lw / Ld ( ХРА 2482 )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 16x35x6 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
