ContiTech AG220XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 220XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 220 |
| Nominal length | Lp/Lw | мм | 558.8 |
| Number of teeth |
110 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
2.5 FKM 80(094,00x02,50)
Manufacturer: KASTAS
Подшипник NJ 2212 E
Manufacturer: NACHI
Sizes: 60x110x28 (mm)
Weight:: 1.23 (kg)
Подшипник 6004ZENR
Manufacturer: NACHI
Sizes: 20x42x12 (mm)
Weight:: 0.069 (kg)
SEALS (REINFORCED SEAL) (BH)
Manufacturer: FEKO
Sizes: 20x47.10x12.90 (mm)
T10 DD 1250 MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG
MEGADYNE ISORAN 1400XH
Manufacturer: ContiTech AG
K21 NBR(50,8x63,5x9,52)
Manufacturer: KASTAS
Sizes: 50,8x63,5x9,52 (mm)
Подшипник C 4913 V
Manufacturer: SKF
Sizes: 65x90x25 (mm)
Weight:: 0.5 (kg)
Подшипник NU 2306 E
Manufacturer: NACHI
Sizes: 30x72x27 (mm)
Weight:: 0.585 (kg)
Подшипник NUP 322
Manufacturer: NACHI
Sizes: 110x240x50 (mm)
Weight:: 10.4 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
