ContiTech AG190XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 190XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 190 |
| Nominal length | Lp/Lw | мм | 482.6 |
| Number of teeth |
95 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
2 FKM 80(012,00x02,00)
Manufacturer: KASTAS
STD 1200 S8M
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ С ОДНИМ НАРУЖНЫМ ШТАМПОВАННЫМ КОЛЬЦОМ, ЗАКРЫТЫМ С ОДНОЙ СТОРОНЫ BK2020
Manufacturer: INA-FAG
Sizes: 20x26x20 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 140x165x13 (mm)
Подшипник N 410
Manufacturer: NACHI
Sizes: 50x110.8x31 (mm)
Weight:: 2.01 (kg)
BB195 ( ВВ 195 ) Le= 5022 мм
Manufacturer: ContiTech AG
AT10 560 GEN III
Manufacturer: ContiTech AG
4 NBR 90(044,00x04,00)
Manufacturer: KASTAS
K74 POM (40x50x16)
Manufacturer: KASTAS
Sizes: 40x50x16 (mm)
Подшипник 6803ZE
Manufacturer: NACHI
Sizes: 17x26x5 (mm)
Weight:: 0.008 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
