ContiTech AG180XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 180XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 180 |
| Nominal length | Lp/Lw | мм | 457.2 |
| Number of teeth |
90 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 57x85x12 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 49.60x61.00x5.70 (mm)
Подшипник 2304
Manufacturer: NACHI
Sizes: 20x52x21 (mm)
Weight:: 0.209 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 50.00x55.30x2.65 (mm)
Корпус UCFCX18
Manufacturer: NACHI
Weight:: 11.3 (kg)
K781 PTFE(60x65x20 )
Manufacturer: KASTAS
Sizes: 60x65x20 (mm)
Подшипник 5309
Manufacturer: NSK-RHP
Sizes: 45x100x39.7 (mm)
Weight:: 1.4 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 52x100x10 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 37x49x8 (mm)
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ NA4915
Manufacturer: INA-FAG
Sizes: 75x105x30 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
