ContiTech AG176XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 176XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 176 |
| Nominal length | Lp/Lw | мм | 447.04 |
| Number of teeth |
88 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
Подшипник NJ 2208
Manufacturer: NACHI
Sizes: 40x80x23 (mm)
Weight:: 0.49 (kg)
XPB 3150 Lw / Ld ( ХРВ 3150 )
Manufacturer: ContiTech AG
K21 PU(120x135x12,3)
Manufacturer: KASTAS
Sizes: 120x135x12,3 (mm)
Bearing NA4905 2RS
Manufacturer: ETERNO
Sizes: 25x30x42 (mm)
Weight:: 0.0925 (kg)
Подшипник FBN-101412Z-E
Manufacturer: NSK-RHP
Sizes: 10x14x12.7 (mm)
Weight:: 0.005 (kg)
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 105x120x15 (mm)
XT200 PU(105x120x10)
Manufacturer: KASTAS
Sizes: 105x120x10 (mm)
RPP8 4512 ( RPP 8 4512 -V, -M, -MFX )
Manufacturer: ContiTech AG
Подшипник 7311DT
Manufacturer: NACHI
Sizes: 55x120x29 (mm)
Weight:: 1.45 (kg)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RCJTY35-N
Manufacturer: INA-FAG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
