ContiTech AG76XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 76XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 76 |
| Nominal length | Lp/Lw | мм | 193.04 |
| Number of teeth |
38 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 30x42x10/5 (mm)
Bearing QJ334N2M (176334H)
Manufacturer: TMB
Sizes: 170x360x75 (mm)
Weight:: 41.5 (kg)
AT10 1480 GEN III
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 60.00x64.00x2.00 (mm)
K21 NBR(42x52x10)
Manufacturer: KASTAS
Sizes: 42x52x10 (mm)
Bearings AXK3552
Manufacturer: INA-FAG
Sizes: 35x52x2 (mm)
Weight:: 0.010 (kg)
Подшипник NNC 4892
Manufacturer: SKF
Sizes: 460x580x118 (mm)
Weight:: 77.5 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 28x45x7 (mm)
AT3/150 GEN III ( АТ3 150 GENIII )
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 206.00x220.00x7.00 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
