ContiTech AG70XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 70XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 70 |
| Nominal length | Lp/Lw | мм | 177.8 |
| Number of teeth |
35 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
Z 65 10x1650 Li / 1673 Ld
Manufacturer: ContiTech AG
Торцевое уплотнение RM MG1-32
Manufacturer: RiMi
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 12.75x62.75x47.50 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 30x62x7 (mm)
Подшипник 7228CDT
Manufacturer: NACHI
Sizes: 140x250x42 (mm)
Weight:: 8.78 (kg)
K01 (360x390x60)
Manufacturer: KASTAS
Sizes: 360x390x60 (mm)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NU2217-E-TVP2
Manufacturer: FAG
Sizes: 85x150x36 (mm)
K23 NBR(100x90x6,5)
Manufacturer: KASTAS
Sizes: 100x90x6,5 (mm)
RPP8 6688 ( RPP 8 6688 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
