ContiTech AG510 L
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 510 L
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.375 |
Tooth step | t | мм | 9.525 |
Thickness | hs | мм | 3.6 |
Tooth height | ht | мм | 1.91 |
Nominal length | Lp/Lw | дюйм (1/10) | 510 |
Nominal length | Lp/Lw | мм | 1295.4 |
Number of teeth |
136 | ||
Minimum pulley diameter | dw | мм | 36.38 |
Max line speed | Vmax | м/c | 50 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 330x370x20 (mm)

Подшипник HR120KBE42X+L
Manufacturer: NSK-RHP
Sizes: 120x215x97 (mm)
Weight:: 13.7 (kg)

C 89 22x2260 Li / 2319 Ld
Manufacturer: ContiTech AG

Корпус UKFLX07+H2307
Manufacturer: NACHI
Weight:: 1.9 (kg)

K69 POM(70x65x9,7)
Manufacturer: KASTAS
Sizes: 70x65x9,7 (mm)

K73 POLYESTER/PTFE(242x250x25)
Manufacturer: KASTAS
Sizes: 242x250x25 (mm)

Mechanical seal RM 108-11
Manufacturer: RiMi

Bearing LM50-OP
Manufacturer: ETERNO
Sizes: 50x80x100 (mm)

Bearing RNU208 (292208)
Manufacturer: TMB
Sizes: 40x80x18 (mm)
Weight:: 0.43 (kg)

Подшипник 100KBE02
Manufacturer: NACHI
Sizes: 100x180x67 (mm)
Weight:: 7.74 (kg)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.