ContiTech AG480 L
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 480 L
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.375 |
| Tooth step | t | мм | 9.525 |
| Thickness | hs | мм | 3.6 |
| Tooth height | ht | мм | 1.91 |
| Nominal length | Lp/Lw | дюйм (1/10) | 480 |
| Nominal length | Lp/Lw | мм | 1219.2 |
| Number of teeth |
128 | ||
| Minimum pulley diameter | dw | мм | 36.38 |
| Max line speed | Vmax | м/c | 50 |
Подшипник 5312NR
Manufacturer: NACHI
Sizes: 60x130x54 (mm)
Weight:: 3.16 (kg)
GEAR PULLEYS 14M-48S 211.11 (14M-48S 211.11/20)
Manufacturer: BBC
Подшипник NP 407
Manufacturer: NACHI
Sizes: 35x83x25 (mm)
Weight:: 1.02 (kg)
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 165.10x203.37x12.70 (mm)
A 180 13x4570 Li / 4600 Ld
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 368x406x18 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 127x156x12 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 25x41.3x6 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 5.00x11.00x3.00 (mm)
Подшипник 7317CDT
Manufacturer: NACHI
Sizes: 85x180x41 (mm)
Weight:: 4.9 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
