ContiTech AG420 L
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 420 L
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.375 |
| Tooth step | t | мм | 9.525 |
| Thickness | hs | мм | 3.6 |
| Tooth height | ht | мм | 1.91 |
| Nominal length | Lp/Lw | дюйм (1/10) | 420 |
| Nominal length | Lp/Lw | мм | 1066.8 |
| Number of teeth |
112 | ||
| Minimum pulley diameter | dw | мм | 36.38 |
| Max line speed | Vmax | м/c | 50 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 34x50x12 (mm)
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 120x140x13 (mm)
Подшипник 51272
Manufacturer: NACHI
Sizes: 360x500x110 (mm)
Weight:: 225 (kg)
Корпус UKIP324+H2324
Manufacturer: NACHI
Weight:: 56.3 (kg)
Подшипник 7014DT
Manufacturer: NACHI
Sizes: 70x110x20 (mm)
Weight:: 0.66 (kg)
K708 PTFE/NBR(300x312,2x8,4)
Manufacturer: KASTAS
Sizes: 300x312,2x8,4 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 13.7x24x5 (mm)
3V 670 / 9J 1702 Le
Manufacturer: ContiTech AG
CX 76 CX 1995 Ld
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ RNA6914-ZW
Manufacturer: INA-FAG
Sizes: 80x100x54 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
