ContiTech AG345 L
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 345 L
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.375 |
Tooth step | t | мм | 9.525 |
Thickness | hs | мм | 3.6 |
Tooth height | ht | мм | 1.91 |
Nominal length | Lp/Lw | дюйм (1/10) | 345 |
Nominal length | Lp/Lw | мм | 876.3 |
Number of teeth |
92 | ||
Minimum pulley diameter | dw | мм | 36.38 |
Max line speed | Vmax | м/c | 50 |
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 32010-X-XL
Manufacturer: FAG
Sizes: 50x80x20 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 80x105x13 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 18x32x8 (mm)
AT3/816 GEN III ( АТ3 816 GENIII )
Manufacturer: ContiTech AG
HTD 8M 2912 ( HTD8M 2912 -V, -M, -MFX )
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 10.20x17x4.10 (mm)
KDN NBR(104x114x6)
Manufacturer: KASTAS
Sizes: 104x114x6 (mm)
K35 PTFE/NBR(190x205,1x6,3)
Manufacturer: KASTAS
Sizes: 190x205,1x6,3 (mm)
Подшипник 7340B
Manufacturer: NACHI
Sizes: 200x420x80 (mm)
Weight:: 53.7 (kg)
Подшипник SL1818/500-E-TB
Manufacturer: INA-FAG
Sizes: 500x620x56 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.