ContiTech AG1750 XH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 1750 XH
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.875 |
Tooth step | t | мм | 22.225 |
Thickness | hs | мм | 11.2 |
Tooth height | ht | мм | 6.35 |
Nominal length | Lp/Lw | дюйм (1/10) | 1750 |
Nominal length | Lp/Lw | мм | 4445 |
Number of teeth |
200 | ||
Minimum pulley diameter | dw | мм | 141.49 |
Max line speed | Vmax | м/c | 50 |
O-RING
Manufacturer: NQK SF
Sizes: 15.00x18.80x1.90 (mm)
Подшипник NF 408
Manufacturer: NACHI
Sizes: 40x92x27 (mm)
Weight:: 1.3 (kg)
K53 PU(40x50x6,2/7,8)
Manufacturer: KASTAS
Sizes: 40x50x6,2/7,8 (mm)
Manufacturer: ContiTech AG
K23 NBR(30x22x6)
Manufacturer: KASTAS
Sizes: 30x22x6 (mm)
Подшипник HR30330J
Manufacturer: NSK-RHP
Sizes: 150x320x72 (mm)
Weight:: 25 (kg)
Bearing KR 19
Manufacturer: ETERNO
Sizes: 19x8x32 (mm)
Weight:: 0.031 (kg)
Bearing NNU4964/W33P6
Manufacturer: TMB
Sizes: 320x440x118 (mm)
Weight:: 53.7 (kg)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 14x30x7 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 7.50x12.80x2.65 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.