ContiTech AG1120 XH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 1120 XH
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.875 |
| Tooth step | t | мм | 22.225 |
| Thickness | hs | мм | 11.2 |
| Tooth height | ht | мм | 6.35 |
| Nominal length | Lp/Lw | дюйм (1/10) | 1120 |
| Nominal length | Lp/Lw | мм | 2844.8 |
| Number of teeth |
128 | ||
| Minimum pulley diameter | dw | мм | 141.49 |
| Max line speed | Vmax | м/c | 50 |
MEGADYNE ISORAN 352XL
Manufacturer: ContiTech AG
Подшипник FWF-222610
Manufacturer: NSK-RHP
Sizes: 22x26x10 (mm)
Weight:: 0.006 (kg)
Торцевое уплотнение RM MG1-35
Manufacturer: RiMi
ШАРИКОПОДШИПНИК РАДИАЛЬНО-УПОРНЫЙ С ЧЕТЫРЕХТОЧЕЧНЫМ КОНТАКТОМ QJ313-MPA
Manufacturer: FAG
Sizes: 65x140x33 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 69.00x72.60x1.80 (mm)
T5 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 52x100x10 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ PBS35
Manufacturer: INA-FAG
K68 POM(72x78x12,3)
Manufacturer: KASTAS
Sizes: 72x78x12,3 (mm)
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ С ОДНИМ НАРУЖНЫМ ШТАМПОВАННЫМ КОЛЬЦОМ HK0609
Manufacturer: INA-FAG
Sizes: 6x10x9 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
