ContiTech AG700 XH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 700 XH
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.875 |
| Tooth step | t | мм | 22.225 |
| Thickness | hs | мм | 11.2 |
| Tooth height | ht | мм | 6.35 |
| Nominal length | Lp/Lw | дюйм (1/10) | 700 |
| Nominal length | Lp/Lw | мм | 1778 |
| Number of teeth |
80 | ||
| Minimum pulley diameter | dw | мм | 141.49 |
| Max line speed | Vmax | м/c | 50 |
V 454/7 DL
Manufacturer: ContiTech AG
Торцевое уплотнение RM MG1-15
Manufacturer: RiMi
Подшипник 23060E
Manufacturer: NACHI
Sizes: 300x460x118 (mm)
Weight:: 72.8 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 205.00x219.00x7.00 (mm)
K11 TPE(115x127,2x12/7,2)
Manufacturer: KASTAS
Sizes: 115x127,2x12/7,2 (mm)
4L 290
Manufacturer: ContiTech AG
Z 36,5 10x927 Li / 950 Ld
Manufacturer: ContiTech AG
Bearing NJ2318
Manufacturer: ETERNO
Sizes: 90x160x64 (mm)
Weight:: 8.33 (kg)
K35 PTFE/NBR(295x319x8,1 )
Manufacturer: KASTAS
Sizes: 295x319x8,1 (mm)
Подшипник 23932AX
Manufacturer: NACHI
Sizes: 160x220x45 (mm)
Weight:: 5.29 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
