ContiTech AG534 XH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 534 XH
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.875 |
| Tooth step | t | мм | 22.225 |
| Thickness | hs | мм | 11.2 |
| Tooth height | ht | мм | 6.35 |
| Nominal length | Lp/Lw | дюйм (1/10) | 534 |
| Nominal length | Lp/Lw | мм | 1356.36 |
| Number of teeth |
61 | ||
| Minimum pulley diameter | dw | мм | 141.49 |
| Max line speed | Vmax | м/c | 50 |
K21 NBR(13x20x6)
Manufacturer: KASTAS
Sizes: 13x20x6 (mm)
HTD 330 5M CXP
Manufacturer: ContiTech AG
HTD 8M 3632 ( HTD8M 3632 -V, -M, -MFX )
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 60x85x6 (mm)
SEALS (REINFORCED SEAL) (FY-P)
Manufacturer: FEKO
Sizes: 90x105x6 (mm)
Krestovina 42х104
Manufacturer: TOYO
ContiTech HTD 5M 20 HP
Manufacturer: ContiTech AG
Bearing 6314Z1 (314Z1)
Manufacturer: TMB
Sizes: 70x150x35 (mm)
Weight:: 2.65 (kg)
Bearing 7212ACP5 (D46212)
Manufacturer: TMB
Sizes: 60x110x22 (mm)
Weight:: 0.8 (kg)
RPP8 6408 ( RPP 8 6408 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
