ContiTech AG507 XH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 507 XH
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.875 |
| Tooth step | t | мм | 22.225 |
| Thickness | hs | мм | 11.2 |
| Tooth height | ht | мм | 6.35 |
| Nominal length | Lp/Lw | дюйм (1/10) | 507 |
| Nominal length | Lp/Lw | мм | 1287.78 |
| Number of teeth |
57.9 | ||
| Minimum pulley diameter | dw | мм | 141.49 |
| Max line speed | Vmax | м/c | 50 |
O-RING
Manufacturer: NQK SF
Sizes: 95.00x111.80x8.40 (mm)
T5 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (A-B)
Manufacturer: FEKO
Sizes: 15x25.50x4.60 (mm)
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 30x42x7 (mm)
K23 NBR(110x90x15)
Manufacturer: KASTAS
Sizes: 110x90x15 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 57.2x76.2x12/7 (mm)
Подшипник 6200-2NKE9
Manufacturer: NACHI
Sizes: 10x30x9 (mm)
Weight:: 0.032 (kg)
T5 DD
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 32x55x8 (mm)
RPP8 4360 ( RPP 8 4360 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
