ContiTech AGSTD 2848 S8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP STD 2848 S8M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.3 |
Tooth height | ht | мм | 2.95 |
Nominal length | Lp/Lw | мм | 2848 |
Number of teeth |
356 | ||
Minimum pulley diameter | dw | мм | 56.02 |
Max line speed | Vmax | м/c | 50 |
Bearing GT22
Manufacturer: INA-FAG
Sizes: 46.038x78.588x20.638 (mm)
Weight:: 0.392 (kg)
K22 NBR(45x55x6)
Manufacturer: KASTAS
Sizes: 45x55x6 (mm)
Bearing 7336 B
Manufacturer: ETERNO
Sizes: 180x380x75 (mm)
Weight:: 46.72 (kg)
Bearing 22210 MW33
Manufacturer: ETERNO
Sizes: 50x90x23 (mm)
Weight:: 0.62 (kg)
K22 NBR(25x33x10)
Manufacturer: KASTAS
Sizes: 25x33x10 (mm)
ПОДШИПНИК ИГОЛЬЧАТЫЙ РАДИАЛЬНЫЙ RNA4830-XL
Manufacturer: INA-FAG
Sizes: 165x190x40 (mm)
Weight:: 1.6 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 40x72x10 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 2316-K-M-C3 + H2316
Manufacturer: FAG
Sizes: 70x170x58 (mm)
AT5/875 ( АТ5 875 )
Manufacturer: ContiTech AG
3.53 NBR 90(041,28x03,53)
Manufacturer: KASTAS
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.