ContiTech AGSTD 1024 S8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP STD 1024 S8M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.3 |
Tooth height | ht | мм | 2.95 |
Nominal length | Lp/Lw | мм | 1024 |
Number of teeth |
128 | ||
Minimum pulley diameter | dw | мм | 56.02 |
Max line speed | Vmax | м/c | 50 |
K17 PTFE/NBR(40x29x4,2)
Manufacturer: KASTAS
Sizes: 40x29x4,2 (mm)

Подшипник 6318DDU
Manufacturer: NSK-RHP
Sizes: 90x190x43 (mm)
Weight:: 4.98 (kg)

SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 25.40x40.58x7.20 (mm)

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 47.5x70.65x9 (mm)

K23 NBR(44,45x28,57x9,52)
Manufacturer: KASTAS
Sizes: 44,45x28,57x9,52 (mm)

C 295 22x7490 Li / 7549 Ld
Manufacturer: ContiTech AG

Торцевое уплотнение RM MG12-90
Manufacturer: RiMi

Bearings FC66558.1
Manufacturer: INA-FAG
Sizes: 38.150x58.290x3.960 (mm)
Weight:: 0.019 (kg)

ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 32218-A-N11CA-A220-270
Manufacturer: FAG
Sizes: 90x160x85 (mm)

RPP8 DD 2484 MFX - Megaflex
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.