ContiTech AGSTD 960 S8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP STD 960 S8M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.3 |
Tooth height | ht | мм | 2.95 |
Nominal length | Lp/Lw | мм | 960 |
Number of teeth |
120 | ||
Minimum pulley diameter | dw | мм | 56.02 |
Max line speed | Vmax | м/c | 50 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 37x65x12 (mm)
AT3 501 F E3/8
Manufacturer: ContiTech AG
Bearing 627 2RS
Manufacturer: ETERNO
Sizes: 7x22x7 (mm)
Weight:: 0.013 (kg)
T20 DD
Manufacturer: ContiTech AG
Корпус UCPX17
Manufacturer: NACHI
Weight:: 17.1 (kg)
Подшипник NU 211 EG
Manufacturer: NACHI
Sizes: 55x100x21 (mm)
Weight:: 0.67 (kg)
T10 DD
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 55x70x12 (mm)
Mechanical seal RM 551-10
Manufacturer: RiMi
Z 68 10x1727 Li / 1750 Ld
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.