ContiTech AGSTD 920 S8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP STD 920 S8M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.3 |
| Tooth height | ht | мм | 2.95 |
| Nominal length | Lp/Lw | мм | 920 |
| Number of teeth |
115 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Max line speed | Vmax | м/c | 50 |
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 125x150x15 (mm)
SPB 1975
Manufacturer: ContiTech AG
Krestovina 32X64
Manufacturer: TOYO
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 30x50x11 (mm)
K22 PU(50x62x8)
Manufacturer: KASTAS
Sizes: 50x62x8 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 45x78x12 (mm)
Krestovina 22x54
Manufacturer: TOYO
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 50x82x10 (mm)
K14 NBR(type s)
Manufacturer: KASTAS
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 50x68x10 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
