ContiTech AGSTD 880 S8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP STD 880 S8M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.3 |
| Tooth height | ht | мм | 2.95 |
| Nominal length | Lp/Lw | мм | 880 |
| Number of teeth |
110 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Max line speed | Vmax | м/c | 50 |
C 52 22x1320 Li / 1379 Ld
Manufacturer: ContiTech AG
ПОДШИПНИК ШПИНДЕЛЬНЫЙ B71920-C-T-P4S
Manufacturer: FAG
Sizes: 100x140x20 (mm)
T5 DD
Manufacturer: ContiTech AG
AT5 DD
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 7.00x15.00x4.00 (mm)
K37 (120x145x18,80)
Manufacturer: KASTAS
Sizes: 120x145x18,80 (mm)
T10 DD
Manufacturer: ContiTech AG
T10 DD
Manufacturer: ContiTech AG
2 FKM 80(068,00x02,00 )
Manufacturer: KASTAS
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 61822-2RSR-Y
Manufacturer: FAG
Sizes: 110x140x16 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
