ContiTech AGHTD 512 8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 512 8M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 512 |
| Number of teeth |
64 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Max line speed | Vmax | м/c | 50 |
RPP14 2814 ( RPP 14 2814 -V, -M, -MFX )
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 229.00x249.00x10.00 (mm)
SEALS (REINFORCED SEAL) (AV)
Manufacturer: FEKO
Sizes: 10.60x16.30x3/5 (mm)
MEGADYNE ISORAN 525 GLD5 ( RPP5 525 GOLD )
Manufacturer: ContiTech AG
CC164 ( СС 164 ) Le= 4267 мм
Manufacturer: ContiTech AG
3 NBR 70(104,50x03,00)
Manufacturer: KASTAS
HTD 8M 6496 ( HTD8M 6496 -V, -M, -MFX )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 30x56x7 (mm)
T10 DD
Manufacturer: ContiTech AG
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
