ContiTech AGHTD 635 5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 635 5M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 3.6 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 635 |
| Number of teeth |
127 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
| Max line speed | Vmax | м/c | 50 |
T10 DD
Manufacturer: ContiTech AG
Торцевое уплотнение RM U4(250)-80
Manufacturer: RiMi
T5 DD
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 83.00x92.00x4.50 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 169.00x175.00x3.00 (mm)
SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 9.70x16x4 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 10x35x8 (mm)
Manufacturer: ContiTech AG
MEGADYNE ISORAN 3280 GLD8 ( RPP8 3280 GOLD )
Manufacturer: ContiTech AG
Подшипник NJ 2228 E
Manufacturer: NACHI
Sizes: 140x250x68 (mm)
Weight:: 14.9 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
