ContiTech AGHTD 630 5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 630 5M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 3.6 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 630 |
| Number of teeth |
126 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
| Max line speed | Vmax | м/c | 50 |
HTD 1424 8M CXA
Manufacturer: ContiTech AG
Krestovina 49x53,2
Manufacturer: TOYO
AT20 1200 GEN III
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 230x270x16 (mm)
XPZ 800 Lw / Ld ( XPZ800 )
Manufacturer: ContiTech AG
K73 POLYESTER/PTFE(50x55x20)
Manufacturer: KASTAS
Sizes: 50x55x20 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 138.60x149.60x5.50 (mm)
XPA 2500 Lw / Ld ( ХРА 2500 )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 265x310x10 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 76x93x10 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
