ContiTech AGHTD 615 5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 615 5M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 3.6 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 615 |
| Number of teeth |
123 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
| Max line speed | Vmax | м/c | 50 |
O-RING
Manufacturer: NQK SF
Sizes: 130.00x135.00x2.50 (mm)
K23 NBR(140x120x14)
Manufacturer: KASTAS
Sizes: 140x120x14 (mm)
K68 POM(40x46x9,5)
Manufacturer: KASTAS
Sizes: 40x46x9,5 (mm)
ATG10 2690 MFX - Megaflex ( ATK10 2690 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
Bearing LM25-OP
Manufacturer: ETERNO
Sizes: 25x40x59 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (HTBL5Y)
Manufacturer: STO
Sizes: 100x120/157.5x15 (mm)
ШАРИКОПОДШИПНИК РАДИАЛЬНО-УПОРНЫЙ С ЧЕТЫРЕХТОЧЕЧНЫМ КОНТАКТОМ QJ334-N2-MPA
Manufacturer: FAG
Sizes: 170x360x72 (mm)
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ БЕЗ КОЛЕЦ K26X30X22-ZW
Manufacturer: INA-FAG
Sizes: 26x30x22 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 74x96x7 (mm)
AT5 DD
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
