ContiTech AGHTD 600 5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 600 5M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 3.6 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 600 |
| Number of teeth |
120 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
| Max line speed | Vmax | м/c | 50 |
Krestovina 28,57X80
Manufacturer: TOYO
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ ДЛЯ МАШИН С КОЛЕБАТЕЛЬНЫМ МЕХАНИЗМОМ 22314-E1-T41A
Manufacturer: FAG
Sizes: 70x150x51 (mm)
Bearing 51334
Manufacturer: ETERNO
Sizes: 170x280x87 (mm)
Weight:: 22 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 47x84x12/5 (mm)
8V 3550 / 25J 9017 Le
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ RNA4902-RSR
Manufacturer: INA-FAG
Sizes: 20x28x13 (mm)
C 173 22x4395 Li / 4454 Ld
Manufacturer: ContiTech AG
ПОДШИПНИК ШАРИКОВЫЙ ЗАКРЕПЛЯЕМЫЙ GRAE17-NPP-B
Manufacturer: INA-FAG
Sizes: 17x40x28.6 (mm)
K103 NBR(45x53x5/6,5)
Manufacturer: KASTAS
Sizes: 45x53x5/6,5 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 100.00x110.60x5.30 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
