ContiTech AGHTD 425 5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 425 5M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 3.6 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 425 |
| Number of teeth |
85 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
| Max line speed | Vmax | м/c | 50 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 29x43x10/5 (mm)
K68 POM(95x101x12,5)
Manufacturer: KASTAS
Sizes: 95x101x12,5 (mm)
SEALS (REINFORCED SEAL) (K)
Manufacturer: FEKO
Sizes: 44x65x9 (mm)
Подшипник 65200/65500
Manufacturer: NSK-RHP
Sizes: 50.8x127x44.45 (mm)
Weight:: 2.89 (kg)
A 73,5 13x1870 Li / 1900 Ld
Manufacturer: ContiTech AG
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 6316-2RSR
Manufacturer: FAG
Sizes: 80x170x39 (mm)
Подшипник 6202-2NKE
Manufacturer: NACHI
Sizes: 15x35x11 (mm)
Weight:: 0.045 (kg)
Подшипник 7326DT
Manufacturer: NACHI
Sizes: 130x280x58 (mm)
Weight:: 17.4 (kg)
Подшипник 120KBE030
Manufacturer: NACHI
Sizes: 120x180x46 (mm)
Weight:: 4.43 (kg)
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 120x150x15 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
