ContiTech AG1250H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 1250 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.5 |
Tooth step | t | мм | 12.7 |
Thickness | hs | мм | 4.3 |
Tooth height | ht | мм | 2.29 |
Nominal length | Lp/Lw | дюйм (1/10) | 1250 |
Nominal length | Lp/Lw | мм | 3175 |
Number of teeth |
250 | ||
Minimum pulley diameter | dw | мм | 64.68 |
Max line speed | Vmax | м/c | 50 |
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ TME60-N
Manufacturer: INA-FAG

SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 135x170x12 (mm)

K05 PU (40x48x4/7)
Manufacturer: KASTAS
Sizes: 40x48x4/7 (mm)

K21 NBR(25x33x7)
Manufacturer: KASTAS
Sizes: 25x33x7 (mm)

ATG10 4210 MFX - Megaflex ( ATK10 4210 BFX - BRECOFLEX )
Manufacturer: ContiTech AG

3.53 NBR 70(183,75x03,53)
Manufacturer: KASTAS

Bearings KRV62
Manufacturer: INA-FAG
Weight:: 0.802 (kg)

K703 PTFE/NBR(50x58,8x6,3)
Manufacturer: KASTAS
Sizes: 50x58,8x6,3 (mm)

Krestovina 30,18X92,05
Manufacturer: TOYO

ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1316-M
Manufacturer: FAG
Sizes: 80x170x39 (mm)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.