ContiTech AG900H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 900 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 4.3 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 900 |
| Nominal length | Lp/Lw | мм | 2286 |
| Number of teeth |
180 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
| Max line speed | Vmax | м/c | 50 |
Bearing K58x65x18
Manufacturer: INA-FAG
Sizes: 58x65x18 (mm)
Weight:: 0.0052 (kg)
T20 DD
Manufacturer: ContiTech AG
Bearing TWC1625
Manufacturer: INA-FAG
Sizes: 25.400x39.688x2.337 (mm)
Weight:: 0.013 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 82x100x12 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 46.00x53.00x3.50 (mm)
Подшипник 53310
Manufacturer: NACHI
Sizes: 50x95x34.3 (mm)
Weight:: 225 (kg)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 17x40x7 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 145x175x13 (mm)
K701 PTFE/Spring(75x84,4x7,1)
Manufacturer: KASTAS
Sizes: 75x84,4x7,1 (mm)
RPP8 2344 ( RPP 8 2344 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
