ContiTech AG850H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 850 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 4.3 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 850 |
| Nominal length | Lp/Lw | мм | 2159 |
| Number of teeth |
170 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
| Max line speed | Vmax | м/c | 50 |
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 47.67x69.75/80.17x13/14.80 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 249.50x266.30x8.40 (mm)
AA92 ( АА 92 ) Le= 2388 мм
Manufacturer: ContiTech AG
KKO NBR 70()
Manufacturer: KASTAS
ПОДШИПНИК РОЛИКОВЫЙ УПОРНЫЙ K89314-TV
Manufacturer: INA-FAG
Sizes: 70x125x10 (mm)
Bearing 7321 AC
Manufacturer: ETERNO
Sizes: 105x225x49 (mm)
Weight:: 9.28 (kg)
HTD 8M 5448 ( HTD8M 5448 -V, -M, -MFX )
Manufacturer: ContiTech AG
MEGADYNE ISORAN 305 RPP5 ( RPP 5M 305 )
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ RNA49/28
Manufacturer: INA-FAG
Sizes: 32x45x17 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 2.60x5.00x1.20 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
