ContiTech AG850H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 850 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 4.3 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 850 |
| Nominal length | Lp/Lw | мм | 2159 |
| Number of teeth |
170 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
| Max line speed | Vmax | м/c | 50 |
B 300 17x7620 Li / 7665 Ld
Manufacturer: ContiTech AG
K68 POM(120x126x12,5)
Manufacturer: KASTAS
Sizes: 120x126x12,5 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 26.00x28.00x1.00 (mm)
BB94 ( ВВ 94 ) Le= 2457 мм
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 28.65x44.45x9.50 (mm)
Подшипник 53206U
Manufacturer: NACHI
Sizes: 30x52x20 (mm)
Weight:: 225 (kg)
ПОДШИПНИК РОЛИКОВЫЙ ОДНОРЯДНЫЙ СФЕРИЧЕСКИЙ 20224-K-MB-C3 + H3024
Manufacturer: FAG
Sizes: 110x215x40 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 58x74x10 (mm)
Подшипник 7224
Manufacturer: NACHI
Sizes: 120x215x40 (mm)
Weight:: 6.05 (kg)
HTD 8M 1808 ( HTD8M 1808 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
