ContiTech AG800H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 800 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 4.3 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 800 |
| Nominal length | Lp/Lw | мм | 2032 |
| Number of teeth |
160 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
| Max line speed | Vmax | м/c | 50 |
O-RING
Manufacturer: NQK SF
Sizes: 22.70x29.70x3.50 (mm)
Подшипник 7919 A5
Manufacturer: NSK-RHP
Sizes: 95x130x18 (mm)
Weight:: 0.597 (kg)
CX 53 CX 1411 Ld
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 112.00x115.60x1.80 (mm)
AT5 DD
Manufacturer: ContiTech AG
Подшипник NUP 236 EM
Manufacturer: NSK-RHP
Sizes: 180x320x52 (mm)
Weight:: 19 (kg)
SEALS (REINFORCED SEAL) (BS)
Manufacturer: FEKO
Sizes: 120x145x15 (mm)
Подшипник 6201-2NSE9
Manufacturer: NACHI
Sizes: 12x32x10 (mm)
Weight:: 0.037 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 65x90x12 (mm)
K21 PU(95x110x9)
Manufacturer: KASTAS
Sizes: 95x110x9 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
