ContiTech AG750H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 750 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 4.3 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 750 |
| Nominal length | Lp/Lw | мм | 1905 |
| Number of teeth |
150 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
| Max line speed | Vmax | м/c | 50 |
Подшипник 7218CDF
Manufacturer: NACHI
Sizes: 90x160x30 (mm)
Weight:: 2.3 (kg)
DSTD 1760 DS8M
Manufacturer: ContiTech AG
Подшипник 72200C/72487
Manufacturer: NSK-RHP
Sizes: 50.8x123.825x36.512 (mm)
Weight:: 2.12 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 42x60x7 (mm)
Подшипник HR32312J
Manufacturer: NSK-RHP
Sizes: 60x130x48.5 (mm)
Weight:: 2.96 (kg)
Подшипник FR 155
Manufacturer: NSK-RHP
Sizes: 3.967x9.119x2.779 (mm)
Weight:: 0.001 (kg)
22x2286 C 90
Manufacturer: ContiTech AG
K01 (85x100x22,5)
Manufacturer: KASTAS
Sizes: 85x100x22,5 (mm)
T10 DD
Manufacturer: ContiTech AG
K21 NBR(52x62x12)
Manufacturer: KASTAS
Sizes: 52x62x12 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
