ContiTech AG730H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 730 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 4.3 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 730 |
| Nominal length | Lp/Lw | мм | 1854.2 |
| Number of teeth |
146 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
| Max line speed | Vmax | м/c | 50 |
O-RING
Manufacturer: NQK SF
Sizes: 66.00x80.00x7.00 (mm)
AT5 DD
Manufacturer: ContiTech AG
Bearing CS1516
Manufacturer: INA-FAG
Sizes: 23.812x30.162x25.400 (mm)
Weight:: 0.038 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 12x25x8 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ PCFTR15
Manufacturer: INA-FAG
ПОДШИПНИК ШПИНДЕЛЬНЫЙ HCS7008-E-T-P4S
Manufacturer: FAG
Sizes: 40x68x15 (mm)
Bearing 498 / 492A
Manufacturer: TIMKEN
Sizes: 84.138x133.350x30.162 (mm)
Weight:: 1.480 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 61.00x71.00x5.00 (mm)
1.5 NBR 70(014,00x01,50)
Manufacturer: KASTAS
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 63x80x9 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
