ContiTech AG600H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 600 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 4.3 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 600 |
| Nominal length | Lp/Lw | мм | 1524 |
| Number of teeth |
120 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
| Max line speed | Vmax | м/c | 50 |
T2/68 ( Т2 68 )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 27x52x5 (mm)
AT20 DD
Manufacturer: ContiTech AG
Подшипник 9180/9121
Manufacturer: NSK-RHP
Sizes: 61.912x152.4x47.625 (mm)
Weight:: 3.98 (kg)
Подшипник 2218
Manufacturer: NSK-RHP
Sizes: 90x160x40 (mm)
Корпус UKP306+H2306
Manufacturer: NACHI
Weight:: 1.9 (kg)
K518 (150x128x26,5)
Manufacturer: KASTAS
Sizes: 150x128x26,5 (mm)
SEALS (REINFORCED SEAL) (C)
Manufacturer: FEKO
Sizes: 55x67x7 (mm)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NJ2215-E-TVP2 + HJ2215-E
Manufacturer: FAG
Sizes: 75x130x31 (mm)
2.62 FKM 80(009,19x02,62 )
Manufacturer: KASTAS
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
