ContiTech AG480H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 480 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 4.3 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 480 |
| Nominal length | Lp/Lw | мм | 1219.2 |
| Number of teeth |
96 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
| Max line speed | Vmax | м/c | 50 |
Подшипник 120KBE30+L
Manufacturer: NSK-RHP
Sizes: 120x180x46 (mm)
Weight:: 3.75 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 130.18x140.84x5.33 (mm)
Подшипник NU 2230
Manufacturer: NACHI
Sizes: 150x270x73 (mm)
Weight:: 18.7 (kg)
C 104 22x2641 Li / 2700 Ld
Manufacturer: ContiTech AG
Подшипник 6221ZNR
Manufacturer: NACHI
Sizes: 105x190x36 (mm)
Weight:: 3.76 (kg)
K68 POM(30x36x9,3)
Manufacturer: KASTAS
Sizes: 30x36x9,3 (mm)
Bearing DAC40750037
Manufacturer:
Sizes: 40x75x37/37 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 80x100x13 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 138x160x15 (mm)
Bearing 7212C (36212)
Manufacturer: TMB
Sizes: 60x110x22 (mm)
Weight:: 0.8 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
