ContiTech AG330H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 330 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.5 |
Tooth step | t | мм | 12.7 |
Thickness | hs | мм | 4.3 |
Tooth height | ht | мм | 2.29 |
Nominal length | Lp/Lw | дюйм (1/10) | 330 |
Nominal length | Lp/Lw | мм | 838.2 |
Number of teeth |
66 | ||
Minimum pulley diameter | dw | мм | 64.68 |
Max line speed | Vmax | м/c | 50 |
O-RING
Manufacturer: NQK SF
Sizes: 68.00x73.30x2.65 (mm)

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 20x40.6x11 (mm)

SEALS (REINFORCED SEAL) (FSS)
Manufacturer: FEKO
Sizes: 34.50x52x15.65 (mm)

Подшипник 51228X
Manufacturer: NSK-RHP
Sizes: 140x200x46 (mm)
Weight:: 225 (kg)

O-RING
Manufacturer: NQK SF
Sizes: 40.95x48.01x3.53 (mm)

ATG10 5630 MFX - Megaflex ( ATK10 5630 BFX - BRECOFLEX )
Manufacturer: ContiTech AG

K09 NBR(115x127x5,5/10)
Manufacturer: KASTAS
Sizes: 115x127x5,5/10 (mm)

SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 85x105x8 (mm)

SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 50x58x4 (mm)

Bearing K15X21X15
Manufacturer: ETERNO
Sizes: 15x21x15 (mm)
Weight:: 0.011 (kg)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.