ContiTech AG330H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 330 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.5 |
Tooth step | t | мм | 12.7 |
Thickness | hs | мм | 4.3 |
Tooth height | ht | мм | 2.29 |
Nominal length | Lp/Lw | дюйм (1/10) | 330 |
Nominal length | Lp/Lw | мм | 838.2 |
Number of teeth |
66 | ||
Minimum pulley diameter | dw | мм | 64.68 |
Max line speed | Vmax | м/c | 50 |
Bearing NJ2220
Manufacturer: ETERNO
Sizes: 100x180x46 (mm)
Weight:: 4.99 (kg)

K81 TPE(62x70x1,9 )
Manufacturer: KASTAS
Sizes: 62x70x1,9 (mm)

SEALS (REINFORCED SEAL) (F)
Manufacturer: FEKO
Sizes: 20x37.10x6 (mm)

Bearing 6200
Manufacturer: ETERNO
Sizes: 10x30x9 (mm)
Weight:: 0.031 (kg)

Bearing NUP2324EM (92624EH)
Manufacturer: TMB
Sizes: 120x260x86 (mm)
Weight:: 23.5 (kg)

Подшипник 23122EX1K
Manufacturer: NACHI
Sizes: 110x180x56 (mm)
Weight:: 5.7 (kg)

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 49x72x8 (mm)

K21 NBR(28x35,5x5)
Manufacturer: KASTAS
Sizes: 28x35,5x5 (mm)

Bearing NJ2215EM (42515EH)
Manufacturer: TMB
Sizes: 75x130x31 (mm)
Weight:: 1.6 (kg)

SPC 4750
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.